Vornado ATH1 Specifications download pdf (Page 7)

Español

Cómo Usar Los Controles Del Calefactor De Torre

Encendido/Apagado

Presione ( ) para encender o apagar la unidad. La luz LED se

ilumina cuando la unidad está encendida. Al apagar la unidad,

la pantalla contará hacia atrás 8 segundos. Este tiempo permite

que el calentador se enfríe antes de apagarse.

Control De Temperatura

Le permite seleccionar su nivel de comodidad deseado.

Presione ( ) para aumentar la temperatura especiﬁ cada.

Presione ( ) para disminuir la temperatura especiﬁ cada. La

salida de calor también se regulará automáticamente para

mantener con precisión la temperatura de la habitación.

Control Del Ventilador

Presione ( ) para seleccionar Continuo (C) o Automático

(A). En el modo Continuo (C), el ventilador funcionará

continuamente a velocidad alta cuando se seleccione Calor

Alto (H), o continuamente a velocidad baja cuando se

seleccione Calor Bajo (L).

En modo Automático (A), la velocidad del ventilador variará

para mantener eﬁ cientemente la temperatura especiﬁ cada.

Control De Ajuste De Calor

Presione ( ) para seleccionar (L) Calor Bajo (máxima 750 vatios)

o (H) Calor Alto (máxima 1500 vatios).

English

Positioning Your Tower Heater

Position your heater so the V-Flow distribution of warm air

is directed across the room, unobstructed. Position it in a

location that is representative of the room temperature. Avoid

areas of temperature extremes such as cold drafts and heat

registers (see IMPORTANT INSTRUCTIONS for safe placement

on page 4).

Placement near a wall or corner

Please position at least 6” away

from walls or other large surfaces.

Doing so will ensure your Tower

Heater has adequate room to

intake air, providing optimum

performance.

Directing the airﬂ ow

Unlike any other tower heater,

this product creates a wide

span of airﬂ ow called V-Flow™

Circulation, eliminating the need

for oscillation. The Vornado logo

indicates the center point of the

V-Flow™ airstream, and can be

used as a reference point for

positioning the product in

the room.

Using your Vornado Heater

Just follow these simple steps.

1. Plug Power Cord into standard wall outlet.

2. Press Power ( ) to turn unit On.

3. Press ( ) to select High or Low Heat.

4. Set Temperature to desired comfort level.

5. Press Fan ( ) to select Continuous (C) or Auto (A).

6. After use, turn the unit Off by pressing Power ( ). The unit will

display an 8 second countdown. This time allows the heater to

cool before shut down.

Resetting Your Vornado Heater

Your Vornado Heater has a multi-level safety shut-off system designed

to prevent overheating. Overheating may occur when the inlets

or outlet are blocked or a foreign object prevents the blade from

turning. If this happens, the safety shut-off system will cut power to

the heat element and you will need to manually reset the heater.

1. Press Power ( ) to turn unit Off and unplug the unit.

2. Remove any obstructions.

3. Wait 5–10 minutes, allowing the unit to cool down.

4. Plug in the unit and place in desired position.

5. Press Power ( ) to turn unit On. Your Vornado Heater should now

function normally.

Note: If the safety shut-off system repeatedly shuts off your heater

or if it will not reset after following the above procedure, DO NOT

ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer

Services Department toll-free at 1-800-234-0604.

How To Use

6”

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Vornado ATH1 Specifications Page 7

Comments to this Manuals

Related products and manuals for Space heaters Vornado ATH1