Vornado VH101 Specifications download pdf (Page 6)

English6

RESETTING YOUR VORNADO HEATER

Your Vornado Heater has a multi-level safety shut-off system designed

to prevent overheating. Overheating may occur when the inlets or

outlet are blocked, a foreign object prevents the blade from turning,

or the appliance tips over. If this happens, the safety shut-off system

will cut power to the heat element and you will need to manually reset

the heater.

Set the POWER switch to OFF and unplug the unit.

Remove any obstructions.

Wait 5 –10 minutes, allowing the unit to cool down.

Plug in the unit and place in desired position.

Set the POWER switch to ON. Your Vornado Heater should now

function normally.

If the safety shut-off system repeatedly shuts off your heater or if it

will not reset after following the above procedure, DO NOT

ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer

Services Department toll-free at 1-800-234-0604.

VH101 OPERATING CONTROLS

POWER ON/OFF

MODE SWITCH

HIGH HEAT

750 watts

FAN ONLY

Fan will run continuously

LOW HEAT

350 watts

CARE & MAINTENANCE

The VH101 has no user serviceable parts. Do not disassemble the

unit as doing so will void your warranty. If service is required, return

your heater to Vornado (see Warranty section for instructions).

The motor inside your VH101 is permanently lubricated and requires

no oiling.

Because your VH101 moves air, it will require regular cleaning. Be

sure to unplug the unit prior to any cleaning activity. Use a vacuum

cleaner with the brush attachment to clean any accumulated dust on

the front grill and the side air inlets.

1 2 3 4 5 6 7 8

No comments

Vornado VH101 Specifications Page 6