Vornado DVTH Specifications download pdf (Page 6)

English

HOW TO USE

Using your Vornado Heater is easy. Just follow these simple steps.

Position your heater so the vortex beam of warm air is directed

across the room unobstructed. Position it in a location that

is representative of the room temperature. The unique side-

angled air inlets allow the heater to be placed closer to walls

than possible with most ordinary heaters (but do not place close

to combustibles). Avoid areas of temperature extremes such

as cold drafts and heat registers. Please refer to IMPORTANT

INSTRUCTIONS at the beginning of this owner’s guide.

Plug the power cord into a standard wall outlet.

Press the POWER button.

Then press the MODE button to select LO (low heat), HI (high

heat), or FA (fan only).

Press the WARMER button to raise the set temperature or

COOLER to lower the set temperature. The unit will display the set

temperature when the SET TEMP light is lit.

Your DVTH will generate only the heat required to obtain and

maintain the set temperature.

CARE & MAINTENANCE

Your heater has no user serviceable parts. Do not disassemble the

unit – it will void your warranty. If service is required, return your

heater to Vornado (see Warranty section).

The motor is permanently lubricated and requires no oiling.

Because your heater moves a substantial amount of air, it will

require regular cleaning. Be sure to unplug the unit prior to any

cleaning activity.

Use a vacuum cleaner with the brush attachment to clean any

accumulated dust on the front grill and the side air inlets. During

the off-season or extended periods of non-use, store your heater.

Unplug the unit and bundle the cord. Save the plastic bag the

heater was shipped in so you can cover the unit and minimize

settling dust.

www.sylvane.com 1-800-934-9194

1 2 3 4 5 6 7 8 9 10

No comments

Vornado DVTH Specifications Page 6